Top 12 Automotive Wiring Tips

The best connection is a properly done solder joint. If you aren’t sure how to solder, crimp the connection then solder it. Cold solder joints not only introduce resistance, but they can come apart.

2) Keep your grounds as short as possible. It is far better to have a few more connections than a long ground that can build heat and introduce ground loops. It is common practice to run a ground wire from a high demand devise such as a fuel pump back to the battery. This not only adds additional loads to the pump or devise but also can lead to device failure. Have you ever seen a production auto with a ground cable longer than the positive cable?

3) If at all possible, use stainless hardware to fasten all primary cables. Some galvanic or plated hardware can cause dissimilar corrosion and can sometimes carry more impedance that its stainless counter parts. On smaller secondary circuits, this is not as important.

4) Battery storage. Keep batteries away from humidity. Keeping it charged will prolong its life. If a battery is dead, cool it before you charge it. Put in the refrigerator or outside if its cold. Cool batteries charge better.

5) Batteries specifications and charge rates are for 77 degrees Fahrenheit. Temperature variations will change charge rates.

6) Use relays. Anytime you want to switch a device that draws more current than is provided by an output of a switch or component you’ll need to use a relay. The coil of an SPDT relay that we most commonly use draws very little current (less than 200 milliamps) and the amount of current that you can pass through a relay’s common, normally closed, and normally open contacts will handle up to 30 or 40 amps. This allows you to switch devices such as headlights, parking lights, horns, etc., with low amperage outputs such as those found on keyless entry and alarm systems, and other components. In some cases you may need to switch multiple things at the same time using one output. A single output connected to multiple relays will allow you to open continuity and/or close continuity simultaneously on multiple wires.

7) Most electromechanical devises are rated according to the MTBF (Mean Time Between Failures). You improve your odds of a long MTBF by keeping your electrical devices in a low humidity, low heat environment.

8) Do not ever use THHN/THWN wire. This wire (insulation) classification is not rated for automotive use. Cars move and vibrate which chafes the insulating material.

9) A wire that is rated for A/C voltage may have a different rating when used in low voltage D/C applications. Your house uses A/C, your car uses D/C.

10) The best primary power cable is a type TEW or MTW (Machine Tool Wire) as its rated for continuous use with higher amperage loads.

11) OFC (oxygen free copper) is by far the best cable for automotive use. However, it is expensive and requires a quality crimper and should be soldered for security. The most common application for this wire is high-end car stereo applications.

12) If you are like me, you may choose to skip OFC and go with TXL wire. TXL (thermal cross-linked) wire is next best. TXL wire has twice the voltage rating of standard GPT (general purpose) wire. Most high-end harnesses are made with this wire. If you want to keep your ride for the long haul, you may want to pony up for a harness made with this wire.

The Automotive Industry Marketing Plan

The auto industry is one of the largest industries in the world. It includes dealers, service shops for repair and body work, parts suppliers, insurance companies and even towing companies just to name a few. All areas of the auto industry share a common interest and that is cars. The interest in the auto industry has done nothing but increase over the years and all areas of the industry are learning to implement new marketing techniques in order to gain their customers attention.

Promotional products have been proven to be very effective marketing tools for businesses within the auto industry. Repair tools, key chains, safety tools, road side kits and many other promotional products that boast the companys name or logo can not only be useful to the consumer but can be very effective in gaining more business for the company. Tow companies often use roadside kits as a promotional part of their marketing campaign and it works. Think about the times of accidents, emergencies or break downs and that feeling of desperation while wondering who you should call. When you reach for the bag in your trunk that supplies your road side safety and emergency supplies and the logo of a towing company is clearly printed with a number for assistance, who else would you call? Many companies offer elaborate kits while others offer simple ones, the effectiveness of the advertising in those situations are not easily compared so there is no real proof that creating a kit complete with jumper cables and hazard signals works any better than one with road flares and a few simple tools.

Insurance companies and parts suppliers can also benefit from this promotional method of advertising. Any event that requires assistance will cause the driver to look for items they already possess in their vehicle to rectify the situation at hand and with those items and the contact information that is the number that will 9 times out of 10 be used.

Branding is another great way to use promotional advertising within the auto industry. When people take great lengths to accessorize or customize their vehicles they often want to show off the brands that they used. By incorporating engraved key chains, branded licensed plates and other accessories that sport the company brand or logo will be a great way to grab the attention of admirers. When consumers see the vehicle looking great and your company brand is located on it you will get the majority of the credit and they of course will come to you for all of their customization needs.

Parts suppliers and service garages often use tools as part of their promotional advertising campaign. This is due to the fact that when a vehicle breaks down or is in need of service or maintenance those tools that are on standby with the company logo on it will often be the reminder for the consumer to contact that company for their parts or service needs. You can use anything from flashlights, tire gauges to multi set tool kits to offer the advertising that you need to get that customer in your door.

The Automotive Industry Doesn,acirc,t Want To Track!

Kath Jukes, a policyholder at LV=, was enmeshed in an smash where her car was avowed cars a transcribe-off.

Kath Jukes, a policyholder at LV=, was drawn in in an mishap where her car was professed car a contact-off. She had funded more than ?7,000 for it and had clocked up solitary 16,500 cars very much. LV= gave Mrs Jukes a cheque for ?4,300 after outcome that two cars in her cars space in a similar condition cost that extent. However, Mrs Jukes tracked down the two cars car and reported that one was not within her indigenous subject and the other had been sold. car Furthermore system knowledgeable her that due to the low good of her car it would cost cars up ?500 to ?725 more to fix than her protection company had set her. Mrs Jukes cars said: ?LV= has made the whole idea massivelyAntonym hecticAntonym. I can\’t buy a car for its car valuation in this sphere, mainly one with such a low range.? LV= devise since upturned the cars expanse to ?5,000 and waived the excess. Jonathan Lelliot, a shopper at Norwich Union, has been car attempting to raise his cover aggregate for his printed-off car. He was offered ?3,000 but has cars seen similar cars in his spot for transaction at ?600 to ?1000 more. Mr Lelliot sent car photos of his car to the insurers to show its condition but the Norwich Union enjoy car not increased his disbursement. With two children we need two cars,? he said, ?Norwich Union is cars existence self-same hard. I\’m not trying to get more than I think the car is worth car I ethical hunger a fair-haired cash? Discrepancies can come to mind after coverage companies appraisalSynonyms the consequence of cars a car which central to policyholders nature dissatisfied once they receive a incomeSynonyms because their car car is in black and white-off. The valuation by the insurers does not always scene into interpretation the province the cars policyholder lives in and the instance of year. For example urban areas may not be ill with the car need for Landrovers so they instructions as a rule cost less there than in a urban question. Cars cars with retracting roofs willpower be more in call in milder months rather than the twilight months. cars Valuations by assurance companies obtain also been reported to cut because the broker does not proceeds car on nourishment that the car was in courteous condition. A spokesman from the Financial Ombudsman, said: cars ?It is likely that cars driven for a digit of years inclination show signs of attire car and tear. We would not envisage to make deductions for minor imperfections that be affected by been the car result of attrition and tear.? Another item elevated by irritated policyholders is that relatively frequently that cars those who receive a cheque from their indemnity company for their on paper-off car do not appreciate cars that if they cash it they are accepting that sum. Consequently they are doubtful to receive car additional cheques. The news is to cash the cheque and include a capital letter explaining that cashing car it is not accession of the car\’s valuation by the indemnification company. For those concerned almost cars decreased use of their car they can ruminate Guaranteed Asset Protection Policy. This is a kind cars of car insurance that covers the underperformance between anything is salaried by the cover company for car a put in writing-off and the volume the insured first paid for the mouthpiece.

The 10 Steps Of Car Salesman Training

When you become an auto sales person, the dealership where you are starting your sales career will typically provide some sort of car salesman training. This training will teach you everything you need to start selling vehicles regardless of you ever having any sales experience. Every car dealer has a certain selling system that they teach their sales people which may consist of 8 to 12 different steps. Overall the car sales systems are generally the same with some of the steps get combined and other dealers drag them out.
I will use a 10 step system to illustrate the steps and the reasons for each step in the car salesman training program so you can see the importance of each step. The sales systems that auto dealers use to train car salesmen is not been put together haphazardly, there have been years of study and research done to create an atmosphere that is conducive to buying a car.

The Car Salesman Training Steps

1. Meet and Greet: This is the introduction of the car sales person to the potential car buyer. You shake hands, exchange names and try to get comfortable with each other.

2. Discovery: This part of the car salesman training is where the sales person will ask the customer questions and try to understand what they want, such as options, colors, new or used, price range etc.

3. Choose a Vehicle: This is a critical step because if you put them in the wrong car you wont sell them no matter how good a car salesman you might be. This is where the car salesman training can make a big difference because you must be sure to choose a vehicle in their price range they actually like and want to drive home.

4. Why Buy Today: After selecting the right car it is time to tell them why they should buy it now. It could be any number of reasons depending on the car. It could be special financing, other interested buyers or the big sale that is going on.

5. Walkaround: During your car salesman training you will be instructed on how to do a proper Walkaround which is exactly what it sounds like. You show the customer all of the features and benefits from under the hood to the interior.

6. Test Drive: You car sales training will also show you the key points of taking your customer for a test drive while you have the potential car buyer focus on the areas or options that are important to them.

7. Negotiation: You learn how to present numbers and payments to the customer and overcome objections which keep you car buyer from saying yes.

8. Closing: Now its time to close the car sale. There are many different car sales closing techniques which you can use to close the car sale which are based on the type of customer you are selling.

9. Delivery: The car salesman training will take you from doing paperwork to greeting the car ready for delivery and introducing your customer to the business manager.

10. Follow Up: The final step of any quality car sales training system includes following up with your customer. It is important to have a happy and satisfied customer so they will return and buy more cars over the years.

As you can see, there is much more to selling cars than driving cars and collecting checks. Each step of the car salesman training is quite involved and could cover all of the word tracks, sales scripts and psychological factors that are involved in selling cars professionally.

Repeatable Weighing For Better Automotive Quality Control

METTER TOLEDO is pleased to announce that results from real-world client installations are in, and the IND780 weigh terminal performs with the reliability METTLER TOLEDO is known for in tough automotive quality-control testing environments.

The IND780 terminal is a perfect match for the automotive industry, where weight is used to check compliance of the car, or of individual components during assembly. With simple connectivity for multiple sensor technologies, IND780 can connect to up to four weighing platforms. This allows the IND780 to produce, accurate, traceable quality control results in several applications along a production line simultaneously.

Smart Data Management
Depending on floor scale configuration, the IND780s flexible weigh system can be programmed to measure variables such as individual wheel weight and total vehicle weight simultaneously. An easy-to-read color display means the automotive assembly user sees every desired value and weight combination at a glance. This simplifies the number of weigh steps required, reducing processing time and increasing productivity. Furthermore, the terminal offers quick-switch soft keys that allow simple export of weigh results in either kilos or pounds. A front-display zero soft key resets all system scales in one stroke.

Configurable softkeys permit single key-press recall and many other important features and functions as well. Target and tolerance records for over- /under-checkweighing can be stored, saving time and reducing error risk. The terminal also has built-in TraxEMT predictive diagnostics software so scale maintenance can be planned in advanceinstead of allowing errors to pass or causing extensiveand expensivedowntime.

With the optional TaskExpert programming tool, IND780 can calculate an even greater number of individual weigh variables in an instant. Quality control experts can develop custom applications to ensure the quick capture of more detailed assembly variables, such as individual axle weights.

Performance-Driven Scales
In a common vehicle-weigh configuration, the IND780 is connected to four METTLER TOLEDO Vertex 2158 floor scales. The Vertex 2158 features a low, user-friendly profile that minimizes operator effort when loading and unloading. Optional ramps make the scale drive-up, drive-offand provide accessibility from all sides, enhancing the scales versatility.

Vertex 2158s unique, patented METTLER TOLEDO rocker-pin suspension makes the scales ideal for automotive manufacturers. It allows the weighing platform to move laterally, ensuring optimum force transmission to the load cell. This prevents the load cell damage that can occur when loads are processed quicklysuch as drive-on, drive-off weighingwhich can cause premature platform failure and poor results. Essentially, the design ensures distortions, uneven floor conditions and lateral shearing forces are absorbed for outstanding accuracy.

Overall, the Vertex 2158-IND780 combination creates a robust, durable weighing system that automotive manufacturers can depend on for years of reliable results.

For more on IND780 and links to complementary METTER TOLEDO technologies, visit: www.mt.com/IND780

Top 10 Mechanic Training Schools

You are a gearhead. Why not get paid big bucks for it? You love the roar of the horsepower and smell of the rubber hitting the road. You would rather restore a rusted-out piece of you-know-what to it’s former glory than buy a car new. You would tear apart a big-block V8 and see what makes it tick – than watch football for 8 hours on any given Sunday. You, my friend, should be doing what you love, and getting paid good top dollar for it.

The schools listed below may be just the ticket you need to take the next step and become a professional mechanic. Get real-world mechanic training in state-of-the-art shops from automotive instructors who know what they’re doing.

Universal Technical Institute
Universal Technical Institute (UTI) offers the training you need for an exciting career as an Automotive, Diesel or Collision Repair & Refinishing technician in a little more than a year. With nine locations nationwide, manufacturer specific training for Audi, BMW, Ford FACT, International, Mercedes, Nissan, Porsche, Volkswagen and Volvo, and the incredible high performance training at Hot Rod U, you need to take a look at what UTI has to offer.

WyoTech
WyoTech is dedicated to superior quality, college-level, career-oriented education in the automotive, diesel, motorcycle, aviation, marine watercraft and collision/refinishing industries. Most WyoTech diploma programs can be completed in less than a year and a half, and there are seven WyoTech campuses located across the country. WyoTech prepares students for the post-graduation working world by teaching on a workday, not a school day schedule. Most students attend classes approximately eight hours a day, five days a week. This is real world technician training for Automotive, Motorcycle, Collision & Refinishing, Aviation, Diesel and Marine technology.

NASCAR Technical Institute
Shift your training into high gear and let over a half a century of racing heritage work for you! NASCAR and UTI have teamed up to open the first-ever NASCAR Technical Institute (NTI) – a training facility committed to high performance, not only on the track, but also in the classroom. Here you’ll receive a wide range of automotive technology courses to train you for a rewarding career as an entry-level automotive technician with the added boost of NASCAR-specific courses and a Ford FACT elective that revs up your training and delivers a fast-paced, well-rounded course of study.

YTI Career Institute
Motorcycle popularity has become mainstream – proven by the increase in riders. With this growth comes the demand for skilled technicians for motorcycle repair and maintenance. At YTI Career Institute’s new Motorcycle Technology Center, you get real-world training in a 15,000 square foot facility which includes motorcycle diagnostic & test equipment – including a DynoJet  250i dynamometer – 16 fully equipped service bays, wireless Internet access throughout the campus and student laptop computers.

Marine Mechanics Institute
The Marine Mechanics Institute (MMI) provides real-world marine technician training programs to start your career in the marine industry. With support and/or endorsements from major marine manufacturers such as American Honda, American Suzuki, Mercury Marine, Volvo-Penta, SeaDoo, Polaris, Bombardier, Kawasaki Motors Corp., USA, and Yamaha Motor Corp. you can train to be a marine technician and launch your career in as little as 60 weeks.

Baran Institute of Technology
Since our founding in 1979, Baran Institute of Technology has emphasized exciting hands-on training in our automotive technical programs and electrical technical programs. You get to work and learn on real projects — for practical knowledge you can use in the real world. Programs include auto body, automotive, CDL, diesel and motorcycle training.

Nashville Auto Diesel College
Love cars and trucks? Get the technical training you need for a rewarding mechanic career at NADC. For over 80 years, Nashville Auto-Diesel College (NADC) has been providing students like you with the hands-on training they need to succeed. Career focused diploma and associates degree programs are available in diesel, collision and refinishing repair, and high performance technologies.

Motorcycle Mechanics Institute
The Motorcycle Mechanics Institute (MMI) Motorcycle Technology programs provide the knowledge and skills you need to become a successful entry-level motorcycle technician. Motorcycle Mechanics Institute (MMI) has two great locations: Phoenix, Arizona or Orlando, Florida, each offering a wealth of exciting places to explore and enjoy with people who share your passion for motorcycles.

Lincoln Technical Institute
Are you looking for hands-on training at a well-respected technical school? Since its founding as a post-war job skill training source in 1946, Lincoln Technical Institute has been helping people just like you achieve their goals in the skilled trades. With national accreditation, state licensing, career education and career placement expertise, Lincoln Tech knows what it takes to help give you the competitive edge you need to not only compete but be successful in today’s fast-paced marketplace.

Regardless of whether you’re still in high-school trying to figure out ‘what you want to be’ or a bit older and looking for a career change to get you out of your current dead-end job, a career in automotive mechanics may be the answer you are looking for. The top mechanic colleges listed above are the best in the business. Take a look at what they have to offer and decide for yourself. Good luck!

What Are All General Automotive Repairs Provided By A Full Service Auto Repair Shop In Bradenton

It is a waste of time and effort and, therefore, of resources, to hop from one auto repair shop to another for various auto repair services. It is also very stressful to have to deal with many different management styles and automotive mechanics. It would be best for you to find a full service auto repair shop in Bradenton 34207 that can provide all general automotive repairs you will need. This will also mean less costs because you will be able to ask for full package discounts. But what exactly are all general automotive repairs that a full service auto repair shop in Bradenton 34207 should provide for you?

First of all, a full service auto repair shop in Bradenton 34207 should handle all general automotive repairs for all the different models of the most well known vehicle brands such as Cadillac, Chevrolet, GM, Pontiac, Oldsmobile, Ford, Lincoln, Mercury, Dodge, Jeep, Plymouth, Chrysler, Daewoo, Audi, BMW, Mercedes, Jaguar, Volkswagen,Volvo, Acura, Honda, Lexus, Scion, Toyota, Nissan, Infiniti, Mitsubishi, Hyundia, Mazda, and Suzuki. Because of this, it should provide no less than genuine automotive parts from the most respected sources such as AC Delco, Bosch, Remy, Motorcraft, Mopar, Goodyear, Dayco, Echlin, Standard, Cardone, Autolite, NGK, Akebono, Nipedenso, and Denso. Choosing such an auto repair shop will keep you protected from fake automotive parts sold by dishonest suppliers in Bradenton 34207. Such fake automotive parts can be very dangerous on the road and can cost the lives of many.

Whatever vehicle brand you have, you will eventually need all major and minor general car repairs. All general automotive repairs should start with complete and accurate diagnostic services including computer diagnostics and computer reprogramming. It should cover all basic preventive maintenance procedures like the transmission flush, checks and repairs of oil leaks, oil change service, auto air conditioning (A/C) repair and complex engine services such as engine rebuild or engine replacement.

Also covered by all general automotive repairs are electronic steering, power steering, power brakes, power windows, power convertible tops, power sunroofs, power locks, air bag systems, alternators, hoses, timing belts, cooling systems, radiators, transmission services, tractions control systems, brakes, antilock brake systems (ABS), body systems, front suspension, rear suspension, air suspension, electrical troubleshooting for all types of electrical shorts and even the repair of vehicular anti theft systems including remote starters and key reprogramming.

To be able to do all general automotive repairs well, a full service auto repair shop should employ only the most highly skilled and experienced professional mechanics. Aside from being experts in their work, they should be able to explain their diagnosis and proposed repair work clearly to you in laymans terms. They should also tell you which procedures are part of preventive maintenance and which are for the resolution of existing vehicular problems.

A full service auto repair shop should give timely and completely detailed price estimates for all general automotive repairs and maintenance procedures it offers. This should be accompanied by a concrete work schedule with definite time frames, as well as well defined and solid warranties. If additional work needs to be done that has not been included in the job order, the auto repair shop should first get the approval of the vehicle owner before proceeding with it.

After a job has been completed, the full service auto repair shop should provide a complete invoice containing a detailed listing of services done, all parts replaced and their corresponding costs. The invoice should indicate if the parts replacements are brand new, remanufactured or used. The replaced parts should be labelled properly and returned to the vehicle owner.

Look for all these characteristics from the full service auto repair shop that offers you all general automotive repairs in Bradenton 34207.

Ways To Spice Up Your Car

Getting new leather upholstery
These days, leather upholstery is no longer only found on the most expensive luxury cars. In addition to making any car interior instantly look and feel more luxurious, leather seats don’t smell musty or wear out the way typical fabric seats do. That is because leather being an organic product can be conditioned and nourished back to its original condition even years after they’ve been installed. Unlike vinyl or PVC upholstery, leather seats never get as hot when you step into a car that’s been parked in the sun.

2. Adding a window tint
As Singapore lies within the tropics and just a few kilometres away from the equator, the sun and its damaging ultra violet rays beats down on us every day of the year. One very effective way of easing the load on your car’s air conditioner and also protect the upholstery, which can get bleached out by constant exposure to the sun, is to install a window tinting film. Brands like V-Kool and Huper Optik are the most established brands.

3. Going for a car grooming package
Car-grooming professionals take the pain out of washing, waxing and polishing the exterior and interior of your car. It gives you more time to enjoy your weekends instead of getting soapy hands and tired arms. There are normally many different grooming packages available and prices may range from around $30 to the thousands. Some of the more popular automotive grooming companies in Singapore are Autoglym, Amazing Glaze and Glare.

4. Modify the suspension
Does your car feel like it’s ‘floating’ at expressway speeds or when cornering on undulating roads? Chances are, the shock absorbers are worn out and need to be replaced. If you drive a popular model, there may be many brands that offer suspension systems that are suitable for your car. Not only will your car ride more comfortably, the better handling responses also mean that your car be able to react quicker if an emergency arises. Some drivers prefer a lowered, sportier stance for their car. To do this, always replace the existing springs with lower and stiffer items. NEVER, EVER have your existing springs cut to a shorter length as your car will ‘bottom out’ easily over speed bumps or road irregularities and can cause irreparable damage. While some drivers claim that a lower, stiffer suspension improves a car’s handling, a less comfortable ride is almost always a resultant side-effect. Be sure however, to check with the workshop that the suspension upgrade is in compliance with the LTA’s guidelines.

5. Upgrading the sound system
Music playback or news reports can be more clearly heard by simply upgrading your speakers as these make the most apparent difference to any sound system.
If your car’s speakers are more than four years old or if they are exposed to heat for prolonged periods, the paper cones found in most speakers can become brittle and not flex sufficiently during dynamic playback. A more powerful amplifier can also bring out the best from your speakers when it comes to producing bass notes you can feel as well as hear.

6. Getting a new exhaust
You can get more horsepower out of your car from installing aftermarket high-performance exhaust system. Due to the improved flow of the exhaust gases, your car will operate more efficiently. However, expect a louder exhaust note and since there are some regulations about aftermarket exhaust system in Singapore first check with the installer if the item is LTA (Land Transport Authority) approved before buying.

7. Getting a new steering, gearlever and pedals
The steering wheel, gearlever and pedals are all parts of a car that one actually touch, and to further enhance the tactile experience of driving, one can have the steering and gearlever wrapped in leather, and drilled aluminium pedals for better grip. For a really sporty feel, the Italian company Momo, which supplies Ferrari with steering wheels and gear knobs, offers an excellent range as aftermarket equipment.

8. Fitting an air conditioner filter
While some car manufacturers have installed high-qualilty air filters to absorb odours and particles in their new models, those with older cars are left breathing fumes and exhausts from other road users. Well, this no longer need be the case as Cairefresh has developed an aftermarket air filter for airconditioners. Containing an electrostatically-charged polypropylene fibre, this filter inhibits fungi and mould growth as neutralising exhaust odours. This is available from most auto accessory outlets.

9. Fitting a DVD player
“Are we there yet?” is something you’ll never need to hear again when taking the family for a long drive. In-car entertainment systems capable of playing DVDs these days are extremely sophisticated with features like Dolby Digital or DTS surround sound capabilities. Best of all, the existing multi-speaker set-up in most cars is usually sufficient for surround sound. Take this a step further by adding a subwoofer speaker and the improvement to the sound quality of your movies can be surprisingly dramatic.The conventional head unit that plays CDs or cassettes and radio broadcasts in the car can be swapped for one that plays DVDs without sacrificing the other functions we’ve come to expect from a car hi-fi. Most of these players also come with a 7-inch screen that electrically folds out of the way when not in use.

For rear passengers however, a larger, ceiling-mounted extra screen or even individual screens for those seated behind, is essential for viewing movies without craning their necks to the front.

10. High performance tyres
For instant performance enhancement, the easiest thing to upgrade on your car are perhaps the tyres. Depending on the existing rubber on your car, fitting ultra high-performance tyres such as the Bridgestone S0-3, Continental CSC 2 or Pirelli P-Zero should improve the car’s handling noticeably. The downsides from these tyres are usually firmer and noisier ride.

11. Fitting more economical tyres
If you are really keen to get the best mileage from your tank of petrol, in addition to being light footed on the accelerator, another effective fuel saving device is to install low-rolling resistance tyres. The brands like Michelin, Pirelli and Yokohama have eco-tyres that have firmer sidewalls so that they roll with less resistance, and thus consume less fuel.

12. Installing a navigation system
If you are constantly thumbing through your street directory because of a bad sense of direction, what might be useful is installing a GPS and CD-Rom based navigation system. On top of displaying a map, most models will even give voice instructions to get to the destination, allowing one to fully concentrate on the driving. On top of this, most sets have flat LCD screens, displaying a map of the local area, that fit into a regular DIN-sized radio compartment.

13. Buying a new set of wheels
Changing to a new set of wheels not only improves how your car looks, but it may also enhance performance. Larger diameter rims certainly make your car look sportier and lighter wheels boost your car’s handling and acceleration, while wider ones allow wider tyres for better high-speed stability if you are a sporty driver.

14. Getting white light bulbs
The headlamps of many new cars today sport a whiter and seemingly brighter spread of light thanks to the use of High Intensity Discharge (HID) technology. If your car has not been homologated with such headlamps which are known as ‘Xenon’ headlamps, it would be illegal to change to the latter. The next best thing however, is to replace the existing halogen lamps with those that emit a ‘whiter’ light. Make sure however, that the wattage is the same

15. Re-painting it
If you have tried polishing and waxing, but your car still looks like a scrap metal on four wheels, then maybe it’s time to repaint it. Re-spraying not only revitalizes the colour of your car (you can always go for a different colour), but the new coat of gloss also gives it a shiny finish, making it look like it just got out of the showroom.

Production Volume Growth, Mpv Market Has Become Hot

The past two years, MPV market rapidly growth, has allowed many enterprises to the charm of this big cake irresistible. According to China Automotive Technology Research Center released data shows that the first half of this year, China produced a total of MPV 18.94 million units, year-on-year up 136.68 percent, sales MPV 16.23 million units, year-on-year increase of more than 100%, reached 101.47%. In the whole passenger car market, MPV become one of the fastest growth market segments.

The data also shows that sales in the first half of the top 10 MPV models had six types of independent brand car; accounted for half of the MPV market. Now, in the MPV own brands market, in addition to jianghuai refine, the grand hiace and so on models have also been won a place in the market.

MPV has across multiple-market segments.

It is can be seen that MPV market performance in the first half of this year continued the good momentum of 2009 growth, the rate of growth has been exceeded sedan and even more than rapidly increase SUV model (growth rate of 87.06 percent year on year), which has let entered MPV market independent brands enterprises, including BYD, etc. will impact the future of the market.

In fact, MPV product is not for a niche market,” Minister of Brilliance Duyuan Peng said in an interview, it is because the MPV product is a versatile car, so it may be in various market segments have their own audience. For instance, it can be used for commercial, public, private, or can be used for logistics, which is why the MPV market in the whole passenger car market growing fastest reason.

The traditional impression of MPV, people thinks that MPV is only one passenger car segment, but it is because of the particular product form and performance, you can let the audience throughout the various market segments, while the needs of their current base already large and still expanding. In the first half year grand hiace reached 70% or 80%.

In Europe, United States, Japan and South Korea these mature cars countries, MPV popularity is very high, its sales accounted for about 10%, most are oriented to domestic markets. For example, in Japan, MPV market share of about 30%; and in the United States, MPV and SUV accounted for 55% market share, every three people will have an MPV in the United States. While in China, the current MPV’s market share less than 5%, if calculated at 10% share, the domestic MPV market will reach millions scale. BYD is very optimistic about the future potential of this market, with 421 families in China increased; in the future MPV market will maintain rapid growth, BYD M6 at this time of listing, is to seize this opportunity.